Tel: (480) 219-9007

Jandel Light Shrouds

Light Shrouds for use with Jandel Engineering Four Point Probing Equipment. Jandel offers three types of light shrouds: the Small Shroud, the Large Shroud, and the Black Cloth Shroud.

Light Shrouds for use with Jandel Engineering Four Point Probing Equipment
Jandel offers three types of light shrouds:

  1. The Small Shroud which is primarily for adding stability when probing onto samples by holding the probe head by hand.
  2. The Large Shroud which covers enough area that it can be used to give protection from light for light sensitive samples up to 2” in diameter. A light shroud has to completely cover the sample being tested for it to block the affects that light can have upon four point probe measurement of light sensitive materials.
  3. The Black Cloth Shroud which can be draped over any Jandel probe station which does not already include an integral light shield. (see page 4 of this document). The black cloth shroud will provide effective light protection for relatively large samples.

Small Shrouds

The Small Shroud is a one-piece Delrin ring (with a lip) that can be fitted onto the nosepiece of the Jandel Cylindrical, Compact, or Cartridge with Lead four point probe head models. It is designed to help steady the probe when applying the probe head by hand.

Small Shroud

Small Shroud
Small Shroud Mounted onto the Nosepiece of a Cylindrical Probe

Each shroud is turned to fit the nosepiece it is supplied with – they should also fit other probes of the same type (e.g., you could move it from one Cylindrical to another, but not necessarily from a Cylindrical to a Compact). The shroud is
adjusted so that it fits the height of the pad on the probe it is supplied with – therefore if moving it from one cylindrical to another there may be a small change in load applied if the two probes have different pad styles or thicknesses. This is for informational purposes as it really shouldn’t affect day-to-day usage.

Small Shroud

Jandel Compact Probe without Small Shroud Installed

Jandel Compact Probe with

Small Shroud Installed

The Small Shroud can be used with Jandel Cylindrical, Compact, and Cartridge with Lead four point probe heads.

Large Shroud

The Large Shroud is a two piece unit that also fits onto the nosepiece of the probe head, but which is designed to be used with one of the Jandel probing units such as the Microposition Probe, the Multi Height Probe, or the Multi Height Microposition Probe. The Large Shroud shields from light an area up to 2” in diameter. The two piece design helps insure a good light seal.

The Large Shroud has a two piece design

The Large Shroud has a two piece design

Large Shroud

The Large Shroud installed on a Jandel

Cylindrical Probe

The Large Shroud shown in use on the Multi Height
Microposition Probe

The Large Shroud is used in conjunction with one of the Jandel four point probing stands to add light protection. The Multiposition Wafer Probe includes an integral light shield, however, the Large Shroud can be used in conjunction with the Multi Height Probe, the Multi Height Microposition Probe, or the Microposition Probe to add light protection for samples up to 2” in diameter.

Black Cloth Shroud

To protect light sensitive samples from light when using a four point probe system which does not have an integral light shroud.

The black shroud cloth measures 65cm to 70cm square and is made of black velvet with a black cotton lining. It can be draped over the four point probe station to provide light protection. The Jandel Multiposition Wafer Probe and the Jandel Universal Probe include integral light shields. The black shroud cloth can be used with the following Jandel Probe models to provide light protection when measuring samples which are light sensitive.

Black Cloth Shroud

The black shroud cloth measures 65cm to 70cm square and is made of black velvet with a black cotton lining. It can be draped over the four point probe station to provide light protection. The Jandel Multiposition Wafer Probe and the Jandel Universal Probe include integral light shields. The black shroud cloth can be used with the following Jandel Probe models to provide light protection when measuring samples which are light sensitive:

Multi Heght Probe
Microposition Probe
Multi Heght Probe
Microposition Probe
Multi Height Microposition Probe
Hand Applied Probe
Multi Height Microposition Probe
Hand Applied Probe

 


Downloads

Product Brochure regarding the SRM Probe Head combined with the RM3000 Test Unit Product Brochure for Light Shrouds for use with Jandel Engineering
Four Point Probing Equipment

 


We Recommend

The optional nosepiece Shroud adds stability when applying the CYL probe. Check it out for more information:

Jandel CYL-HM21 Four Point Probe


 
Four-Point-Probes is a division of Bridge Technology. To request further information please call Bridge Technology at (480) 219-9007 or send e-mail to Joshua Bridge at: sales@bridgetec.com