Tel: (480) 219-9007

Multiposition Wafer Probe for the Measurement of Wafer Resistivity

The instrument comprises a white powder-paint coated metal base carrying a Delrin column supporting the vertical slide, operating lever shaft, and micro-switch. The vertical slide carries the probe head, secured by a clamp screw. The probe head is positioned so that the micro-switch does not pass current until the probes have made contact, lost motion ensures that the current is switched off before the probes are raised.

Jandel Multiposition Wafer Probe for the Measurement of Wafer Resistivity

The instrument comprises a white powder-paint coated metal base carrying a Delrin column supporting the vertical slide, operating lever shaft, and micro-switch. The vertical slide carries the probe head, secured by a clamp screw. The probe head is positioned so that the micro-switch does not pass current until the probes have made contact, lost motion ensures that the current is switched off before the probes are raised.

The wafer table slides towards the operator to enable the wafer to be centrally positioned, after which the vacuum control valve can be operated to secure it in position. Annular rings allow various wafer sizes to be centered. The 6″ Multipostion Wafer Probe has circular patterns on the wafer chuck with diamters of 25mm, 50mm, 75mm, 100mm, and 125mm. The 8″ system has circles at 125 and 150mm. When the table is pushed to the limit of its travel, a measurement can be made at it’s center. Four radial positions at right-angles are denoted by a spring-loaded index ball incorporated in the rotary table. The radial distance of measurement is denoted by a similar arrangement on the linear slide index plate. Unwanted settings can be blocked off by easily removed screws. So that, for example, one could choose to measure at the center and four points at 50mm radius.

A grounded metal shield screens the wafer from light and electrical noise during measurement. It is arranged that the shield rises when the probe head is fully lifted to permit loading.

Principal Features:

  • Easily pre-set to measure wafer from one to nine positions
  • Eight inch wafer capacity on vacuum chuck – six inch model available
  • Lever-operated probe with switched current leads to prevent arcing
  • Repositioning accuracy within +/- 1 mm
  • Precision low maintenance slides
  • Shrouded measuring area to eliminate light and electrical interference
  • Includes one Jandel Cylindrical probe head

Specifications:

8" Model Table:

Hard anodised aluminum alloy with vacuum hold, centering grooves, and tweezer notch.
Wafer Capacity: 5, 6, and 8″ nominal diameters
Preset Measurement Positions: Centre and four radii at right angles 32, 38, 50, 57, 68, and 94mm.

Wafer 1/2 R 6mm from edge
5″ 32mm 57mm
6″ 38mm 68mm
8″ 50mm 94mm
ASTM F81-89 Sampling plan C

 

6" Model Table:

Wafer Capacity: 3, 4, 5, and 6″ nominal diameters
Preset Measurement Positions: Centre and four radii at right angles 15, 20, 25, 35, 50, and 60mm
Services: Vacuum line or pump required
Dimensions: 355 x 215 x 195mm high
Net Weight: 6″ – 3.5kg 8″ – 4.0kg

 


Downloads

Instruction manual for the Multiposition Wafer Probe (559K PDF file) Instruction manual for the Multiposition Wafer Probe (559K PDF file)
Product brochure for the Multiposition Wafer Probe (36K PDF file) Product brochure for the Multiposition Wafer Probe (36K PDF file)
A high resolution image of the Multiposition Wafer Probe A high resolution image of the Multiposition Wafer Probe

 


System Configurations

Multiposition Wafer Probe with RM3000 Test Unit Multiposition Wafer Probe with RM3000 Test Unit
Multiposition Wafer Probe with HM21 Hand Held Meter Multiposition Wafer Probe with HM21 Hand Held Meter

 


Four-Point-Probes is a division of Bridge Technology. To request further information please call Bridge Technology at (480) 219-9007 or send e-mail to Joshua Bridge at: sales@bridgetec.com